These brackets allows you to mount a ZWO Electronic Automatic Focuser
(EAF) onto your SCT telescope.
The ZWO supplied M4 screws are used to attach the EAF to the bracket.
Where necessary a coupler is provided to connect the EAF pinion shaft
to the focuser pinion shaft and is held securely with M3 set screws. Note
that the user will need to have a 1.5mm hex key for the M3 set screws (not
provided).
Celestron and Meade SCT Brackets:
EAF-C5 : EAF bracket for the Celestron C5
EAF-C6.8.9.25-RASA8 : EAF bracket for modern Celestron C6/C8/C9.25/RASA8 scopes that have 27mm between focuser mounting screws
EAF-C11.14-RASA11v2 : EAF bracket for modern Celestron C11/C14/RASA11 scopes that have 34mm between focuser mounting screws
EAF-C6.8.9.25-Classic : EAF bracket for classic Celestron C6/C8/C9.25 scopes that have 23mm between focuser mounting screws
EAF-C11.14-Classic : EAF bracket for classic Celestron C11/C14 scopes (non-Fastar) that have 34mm between focuser mounting screws
EAF-MLXGPS : EAF bracket for Meade LX200GPS/LX90GPS scopes
EAF-MLXACF : EAF bracket for Meade LX200ACF/LX90ACF scopes
EAF-MLXClassic : EAF bracket for Classic Meade LX200 scopes
EAF-MLX850 : EAF bracket for Meade LX600 and LX850 scopes
See pictures for illustrations of "modern" vs "classic" Celestron focuser
mounting brackets.
SCT bracket note: As the focuser moves there is an internal screw that also travels in and out. The EAF bracket is designed to allow for some of this travel around the focus point, but does not allow for the full outward focuser travel. Prior to installing the bracket make sure the scope is roughly in focus.
If you don't see a bracket that meets your needs I would be glad to work with you to come up with a solution.
Color Note: The coupler will be black due to the special filament used for the coupler. The bracket can be black, red or silver.
Priority shipping available also. International shipping calculated at checkout. Please see the shipping tab for more info.
Celestron and Meade SCT Brackets :
Printed in durable, temperature tolerant PETG filament.